This location and services are unavailable due to COVID-19.

The Fabric Prototype Plotters service is provided by Learning Space Ops. The Fabric Prototype plotters have a printable width of 24 inches and can print up to 72 inches in length. See below for available fabrics, sizes and Print Point amount.

Fabric Prototype Printing is available to Degree/Credit seeking students registered for the current academic term and faculty.

Location

Fabric Prototype Plotter prints are available for pick up during University Center U432 hours of operation.

Fabric Type - Sizes - Print Point Amount

Fabric Size (inches) Print Point Amount
100% BELGIAN LINEN 3.5 oz. (L001F01)  24 x 12 13.76
100% BELGIAN LINEN 3.5 oz. (L001F01)   24 x 24 27.54
100% BELGIAN LINEN 3.5 oz. (L001F01)  24 x 36  41.30
100% BELGIAN LINEN 3.5 oz. (L001F01)  24 x 72 82.60
100% BELGIAN LINEN 3.5 oz. (L001F01)  40 x 40 76.48
COTTON PERCALE (C005S02)  24 x 12 12.39
COTTON PERCALE (C005S02)  24 x 24 24.77
COTTON PERCALE (C005S02)  24 x 36 37.16
COTTON PERCALE (C005S02) 24 x 72 74.31
COTTON PERCALE (C005S02)  40 x 40 68.81
COTTON SHEETING (C007S02) 24 x 12 12.71
COTTON SHEETING (C007S02) 24 x 24 25.41
COTTON SHEETING (C007S02) 24 x 36 38.11
COTTON SHEETING (C007S02) 24 x 72 76.21
COTTON SHEETING (C007S02) 40 x 40 70.57
CREPE GEORGETTE 10 mm (S025S02) 24 x 12  13.60
CREPE GEORGETTE 10 mm (S025S02) 24 x 24 27.19
CREPE GEORGETTE 10 mm (S025S02) 24 x 36 40.79
CREPE GEORGETTE 10 mm (S025S02) 24 x 72 81.57
CREPE GEORGETTE 10 mm (S025S02) 40 x 40 75.53
SILK CHARMEUSE 19.5 mm (S010S02) 24 x 12 15.18
SILK CHARMEUSE 19.5 mm (S010S02) 24 x 24 30.36
SILK CHARMEUSE 19.5 mm (S010S02) 24 x 36 45.54
SILK CHARMEUSE 19.5 mm (S010S02) 24 x 72 91.07
SILK CHARMEUSE 19.5 mm (S010S02) 40 x 40 84.33
SILK ORGANZA 8 mm (S016S02) 24 x 12 13.40
SILK ORGANZA 8 mm (S016S02) 24 x 24 26.79
SILK ORGANZA 8 mm (S016S02) 24 x 36 40.18
SILK ORGANZA 8 mm (S016S02) 24 x 72 80.36
SILK ORGANZA 8 mm (S016S02) 40 x 40 74.40

Additonal Information

  • All request for Fabric Prototype Plotter print must be submitted using the Fabric Prototype Plotter Print Order Form and must meet the following criteria & guidelines.

  • Prints may be no larger than 24 inch x 72 inch (24" x 72" or 60.96cm x 182.88cm).

  • File should be submitted as .pdf (PDF format)

  • File size should be less than 100MB.

  • Please do not use "registration black"

  • Maximum resolution is 300 dpi

  • Your image should fit in the fabric size you have selected. If the image size does not fit into the fabric size you have selected, you will be contacted by email to review options.

  • Please email POC@newschool.edu for assistance with submitting a request.